Tile Installation Costs
Written by

How Much Does Tile Installation Cost?

If you’re searching for tile installation costs, this post should help point you in the right direction!

The average cost of tile installation is $1,769 according to MK Remodeling. Tile installation costs ranged from $862 to $2,688 in the US for 2019.

Plenty of homeowners can usually plan on spending between $861 and $2,688 or an average of $1,769 for the installation of tile flooring. For just about every tile project, costs can range around $13.50 to $83 per square foot. The typical homeowner pays about $15 to $20 per square foot for tile installation and materials. The average cost is $3,500 for a tile countertop and around $1,500 for a kitchen or bathroom backsplash. That comprises of an average of $5 to $10 per square foot for the tile, and around $4 to $14 per square foot for an experienced tile installer to install it.

Tile is one of the most accommodating floor, countertop and wall materials conveniently available for the homeowners of today. Some tile come with a special coating that makes them resistant to water or ingrained dirt and are easy to maintain and keep clean. Its long-life span is typically the main reason most homeowners install tile in their homes. With adequate installation from a skilled and experienced tiler, tile can last up to 20 years without having to do any significant repairs to it.

Cost details are based on real project costs as reported by 10,862 HomeAdvisor members.

Tile Install Per Square Foot




Area Preparation

Other Materials

Old Surface Removal


Per Square Foot

$0.50-$15 Indoor – $1-$35 Outdoor





$13.50-$63 Indoor – $14-$83 Outdoor

To install tile in your home, the range is approximately $13.50 to $63 per square foot. If you want your tile installed outdoors, you can expect to pay up to $14 to $83 per square foot. The majority of the expense is for tiling materials and labor.

Tile Material Cost Per Square Foot




Porcelain Wood Tile

Rectified Tile



Indoor / Outdoor

$3-$10 / $3-$35

$0.50-$7 / $1-$35

$3-$12 / $3-$35

$0.50-$15 / $1-$35

$5-$15 / $5-$35


When considering a tile project, today’s homeowners can decide on any kind of tile from premium, designer tiles to the least costly ceramic. Before starting your search for the perfect style of tile, consider a few factors such as its strength, quality, composition, what it is to be used for and where it going to be located at. Some tile is too weak and thin to use for flooring, but are ideal for backsplashes, and in some cases, bathroom or kitchen countertops.

Cost of Ceramic vs Porcelain

The cost of ceramic tiles varies from around $0.50 to $35 per square foot. Ceramic tile is less durable and softer than porcelain, so they will typically cost less. Porcelain tiles will cost around $3 to $35 per square foot. Thin porcelain tends to hit the most expensive side of the cost range. They are put through a special process that makes them extremely durable with minimal thickness.

Tile Installation Labor Cost

The labor expense for tile installation can range from around $4 to $32 per square foot. Flooring installation can go from $4 to $14 per square foot, in comparison to $25 to $32 per square foot for kitchen or bathroom backsplashes or countertops. Even though this expense is commonly set by the square foot, some professional installers may charge by the hour. In that case, hourly rates go can range from $30 to $120, depending on the size and the complexity of the project.

Tile Installation Cost Factors


Other Materials

Old Flooring Removal, Countertop or Backsplash

Cost To Repair A Sub-Floor

Cost To Install A New Sub-Floor

Find out if the surface is level and utilize a self-leveling compound if necessary.

Cost Per Square Foot





Leave a Reply

Your email address will not be published. Required fields are marked *