Cost To Replace A Pool Pump

Replacing a pool pump costs an average of $440, with prices ranging between $80-$800, according to Improvenet.

Pool Pump Replacement Cost

Owning a swimming pool involves routine maintenance, which is comprised of repairing the pool heater, liner and replacing the pump. Your pool pump is a crucial component of the pool’s filtration system. As time goes on, though, the pump will eventually wear out.

On average, high quality pumps will need to be replaced every 8-12 years. Replacing the pump yourself could end up costing anywhere from $150-$800, depending on the type of pump needed.

• Lowest Cost: $80.
• Average Cost: $440.
• Highest Cost: $800.

Signs You Need To Replace A Pool Pump

There are five clear signs that a replacement is necessary for your pump, including:

• Rumbling noises.
• Grinding.
• 10+ years old.
• Water leaks.
• Bubble buildup.

Rumbling noises coming from your pump are easy to hear. Excessively-vibrating pumps can often create loud and constant noise. The pump becoming loose or dislodged is the most common reason behind the noise. It is recommended to get the issue fixed immediately before it becomes a larger problem.

Typically, grinding sounds are confused with rumbling noises at first. However, there is a big difference between these two sounds. Grinding noises indicate your pump needs new bearings. Older bearings tend to lead to the motor overheating. While bearings are generally cheap, replacing them will require opening the pump. This task is best left to the pool professionals.

Even well-maintained pumps will wear out over the years. They are built to last 8-12 years, but it is not uncommon to notice failure at an earlier age. Consider a pump replacement when the part gets older.

Whenever you notice bubbles in your pool water, it is a troublesome sign for pool owners. Bubbles are a clear indication of an air leak inside the pump. Air leaks can cause dirty water and other potential health hazards.

When Is It Time To Replace A Pool Pump?

The two elements of a pool pump are the pump and motor device. Either part can fail eventually, requiring maintenance. Here are a few indications that it’s time to replace your pool pump:

• Motor failure.
• Motor producing loud noises.
• Pump leaking.
• Pump is not pumping water. 

Should You Replace The Pump Or Motor?

If the pool pump is less than 10 years old and the exterior shows no signs of deterioration, then replacing the motor is suggested. If the pump is older and replacing the motor costs about 75% as much as a pump replacement, it’s recommended to replace the pump at this time. Replace the pump if it is still under warranty.

Motor replacement is less expensive than a pump replacement. Replacing the pump as a DIY project could cost anywhere from $25-$200. Hiring a professional pool service for this task may only tack on an additional $40 to the overall price tag.

DIY Or Hire A Pool Professional?

Undoubtedly, a pump replacement will require fundamental knowledge and confidence with electrical undertakings. Failing to do this job properly can result in injury and/or property damage. Contact a local pool service for all your pool pump needs!